RECOVERED INDUSTRIAL MATERIALS
Pyrolysis oil, carbon-rich material and steel wire recovered from end-of-life tyres. Explore each product and the details that matter for your application.
THREE STREAMS. DIFFERENT REQUIREMENTS.
ENVIROPYROFUEL recovers these materials through controlled waste-tyre pyrolysis in Chhindwara, Madhya Pradesh. Each stream needs its own specification and application review. Availability, lot properties, samples and supply terms are confirmed for each enquiry.
Conceptual material film. Appearance is illustrative.
01 / LIQUID RESOURCE
A liquid hydrocarbon stream recovered by cooling and condensing vapours from waste-tyre pyrolysis. Its composition and properties depend on the feedstock and process.
Selected industrial heating and thermal applications, where the material meets the equipment owner’s requirements and applicable rules. Any proposed use needs a review of the actual lot, handling arrangements and burner compatibility.
Treat these as parameters to request, not published product specifications. Your application may also need acidity, distillation, low-temperature or contaminant testing. Direct use as diesel or a substitute for another fuel must not be assumed.
Discuss pyrolysis oilConceptual material film. Particle form is illustrative.
02 / SOLID RESOURCE
The carbon-rich solid residue recovered after tyre pyrolysis. Alongside carbonaceous material, it can contain mineral matter and residual volatile compounds.
Further processing or selected material and fuel applications, subject to grade, testing and the buyer’s requirements. A proposed filler or other material use needs evaluation in the actual formulation or process.
Recovered char and qualified recovered carbon black are different product descriptions. A rubber-grade designation or direct replacement for virgin carbon black requires separate processing evidence and application testing.
Discuss carbon-rich materialConceptual material film. Wire form is illustrative.
03 / METAL RESOURCE
Steel reinforcement separated from processed tyres. Its form and cleanliness depend on the tyre mix and the recovery process.
Metal recycling and downstream steel recovery, subject to the receiving buyer’s specification. Confirm whether the proposed wire form, remaining non-metal material and packing are suitable for the intended operation.
Agree the accepted condition, quantity basis and any deductions before dispatch. A sample or representative photos can support the discussion; the delivery should be assessed against the agreed lot description.
Discuss recovered steel02 / AT A GLANCE
Start with the intended use. The evidence needed for a liquid fuel application is different from a filler trial or a metal-recycling purchase.
| Buyer question | Pyrolysis oil | Carbon-rich material | Recovered steel |
|---|---|---|---|
| Proposed use | Selected industrial heating or thermal application | Further processing, or a qualified material or fuel application | Scrap-metal recycling or downstream steel recovery |
| Key fit check | Lot properties, burner compatibility and handling | Composition, particle properties and application performance | Wire form, cleanliness and receiver acceptance |
| Useful evidence | Representative sample, relevant test results and safety information | Lot analysis, particle or surface data where relevant, and trial results | Lot description, representative sample or photos, inspection and weight records |
| Include in your enquiry | Equipment or process, fuel requirements, quantity and destination | Intended use, target specification, form and quantity | Receiver specification, packing, quantity and destination |
On a smaller screen, scroll the table sideways to compare all three materials.
03 / EVIDENCE BEFORE A DECISION
Ask which records are available for the proposed material. Match each document and sample to the lot under discussion.
A certificate of analysis records measured properties. Check that it identifies the material and lot, gives test methods and units, and separates measured results from specification limits.
A safety data sheet describes hazards and handling information, including storage, exposure controls, emergency measures and transport information. It answers different questions from a quality report.
A sample allows inspection or testing of the material supplied for evaluation. Agree how it represents the proposed lot and how later deliveries will be checked. A laboratory result alone does not establish performance in your equipment or formulation.
MAKE THE FIRST CONVERSATION USEFUL
A clear buying brief helps the team assess the product you need and the evidence required before a supply decision.
04 / BUYER QUESTIONS
The right answer depends on the material, its actual properties and your intended use.
First assess the current lot’s properties and handling information against the equipment owner’s requirements and applicable rules. Burner compatibility, storage arrangements and any controlled trial should be agreed with qualified personnel. Direct substitution for an existing fuel must not be assumed.
The product described here is carbon-rich recovered material. Ash, residual volatile matter, particle properties and processing history matter. Any claim to a rubber-grade carbon-black designation or equivalent performance needs separate qualification against the buyer’s specification.
Tell us which parameters and documents your application requires. The team can discuss what is available for the proposed lot and whether further testing is needed. This page does not publish fixed assay values or imply that every listed test has already been performed.
Include the product, proposed use, sample quantity and evaluation plan in your enquiry. Sample availability, preparation, charges and dispatch arrangements are confirmed with the team. Agree how the sample relates to the commercial lot.
Prices and minimum quantities are discussed for the proposed product, lot and delivery arrangement. Share your required quantity, destination and timing so the team can discuss availability and quote terms.
Provide the destination, quantity and preferred packing or receiving arrangement. Confirm transport responsibilities and applicable documentation for the actual material and shipment before dispatch. Supply and delivery are subject to agreed terms.
An SDS communicates hazards and handling information. A certificate of analysis records measured properties of an identified lot. Review both where relevant, along with the evidence needed for your own application.
YOUR NEXT STEP
Tell us the product, intended use, required quantity and destination. Include the tests or specification your application needs.
It is saved in our private enquiry system for review and response. Product suitability, availability and commercial terms are confirmed before an order.
LOOK CLOSER AT THE EVIDENCE
Educational articles by Gaggan Sharma, with sources and explanatory illustrations.
Technical references: Research on tyre-derived oil ↗ · Characterising recovered carbon black ↗ · CalRecycle: markets for tyre wire ↗ · Safety data sheet information ↗.
